Aluminum Gates · Los Angeles

Modern aluminum gates,
built to stay straight

Custom welded aluminum driveway and pedestrian gates, from clean horizontal slats to full privacy designs. Swing, sliding, bi-folding and telescopic, powder coated in over 200 colors. Nothing is made until you approve the blueprint.

Custom black full-privacy horizontal aluminum gate on a Mediterranean-style Los Angeles home

How each aluminum gate opens

The right type depends on your driveway: its length, slope and how close it is to the street. Press play to see each one open. We check all of this at your design consultation.

Every gate we build is custom made. These are only a few ideas, and the options are almost endless.

01Opens like a door

Aluminum swing gates

FRONT VIEWTOP VIEWARM MOTORARM MOTOR▼ STREET

Single or double gates, opened by arm motors mounted on the gate. Needs clear, fairly flat space behind the gate to open.

02Slides behind the wall

Aluminum sliding gates

FRONT VIEWTOP VIEWMOTORSLIDES BEHIND THE WALL▼ STREET

Slides open behind a block wall, driven by a slide motor standing right next to the gate. Needs wall space about as wide as the opening.

03Two panels that stack

Aluminum telescopic sliding gates

FRONT VIEWTOP VIEWMOTORSLIDES BEHIND THE WALL▼ STREET

Not enough wall for a full slide? Two panels stack behind the wall as they open, so they need about half the space.

04Folds in the middle

Aluminum bi-folding gates

FRONT VIEWTOP VIEW▼ STREET

Each side folds in half as it opens, so it needs about half the swing space. A strong fit close to the street.

05Walk-through and side gates

Aluminum pedestrian gates

FRONT VIEWTOP VIEW▼ STREET

Match your driveway gate and fence, with keypad and smart lock options.

Built to last

Thick, welded aluminum that will not sag

Many contractors use screw-together aluminum kits that sag over time. We use thick, heavy-duty aluminum that is precision-welded and powder coated in over 200 colors, including wood-grain finishes. Aluminum does not rust, and a welded frame stays straight for years.

Book Design Consult

How we build your aluminum gate

Design consultationWe visit your home, measure the entrance and talk through styles and options.
2D blueprintYou approve the exact design before anything is made.
Welded in aluminumYour gate is cut, welded and powder coated to the design you approved.
Installed in 1 to 5 daysWe install, clean up and walk you through it, including automation if you added it.
Reviews

What homeowners say about their gates

Google5.0★★★★★550+ reviews

★★★★★

“We hired DNA for a newly constructed 10,000 sq-ft house. We had very high expectations of the gates’ quality to match the quality of the house designed by a well-known architect in Los Angeles. Every component was built and selected carefully with high quality.”

IIraj NasseriGoogle review
★★★★★

“From start to finish, the team was professional, efficient, and knowledgeable. The quality of the gate and the attention to detail during installation were outstanding. The team kept everything tidy and was respectful of my property throughout the entire process. I now have a gate that not only adds security but also enhances the curb appeal of my home.”

NNate RosenbergGoogle review
★★★★★

“We installed 3 gates from DNA Gates. They were fast and really did a good job installing the gates. Very professional”

JJin ChungGoogle review

See all reviews →

Questions about aluminum gates

Which aluminum gate is right for my driveway?

It depends on three things: how much flat space you have behind the gate, how much wall or fence you have beside it, and the slope. Plenty of flat space behind: a swing gate. Wall space beside the opening: a sliding gate. Short driveway close to the street: a bi-folding or telescopic gate. We measure all of this at your design consultation and recommend the best fit.

Will an aluminum gate sag?

Not when it is welded. Many aluminum gates are screw-together kits that loosen and sag over time. We use thick, heavy-duty aluminum and weld every frame, so it keeps its shape.

Does aluminum rust?

No. Aluminum does not rust. We powder coat every gate for color and an extra layer of protection against sun and weather.

What colors can I choose?

Over 200 powder-coat colors, from classic black and bronze to whites and grays, plus wood-grain finishes that give you the look of wood with less upkeep.

When do I need a telescopic sliding gate?

A regular sliding gate needs wall or fence space about as wide as the opening, so it can slide fully behind it. If you only have about half that space, a telescopic gate uses two panels that stack as they open, so it fits.

My driveway slopes. Can I still have a swing gate?

On a sloped driveway, an aluminum sliding gate is usually the best choice, because it slides along the wall instead of swinging into the slope. If the area behind the gate is flat, a swing gate works too. We check your slope at the design consultation.

What motor does each gate type use?

Swing gates use arm motors that connect the pillar to the gate, such as the LiftMaster LA500. Sliding and telescopic gates use a standing slide motor behind the wall, such as the LiftMaster RSL12UL. We add remotes, keypads and video intercoms the same way.

Aluminum or iron: which is right for me?

Aluminum is lighter and suits modern slat and privacy designs. Iron is heavier and stronger, and it is the best choice for ornate, classic and estate designs. We show you both at the design consult.

Invest in an entrance you’ll love coming home to, using the highest-quality materials

Custom-Built to Match Your Home
Fully Licensed, Bonded & Insured
Fast Responses & Clear Communication
Stress-Free Installation & Cleanup
Backed by a 5-Year Warranty

Request Design Consult

Design consultation form

The live form appears in Preview and on the website.