Custom wood driveway and pedestrian gates in premium Iroko and Western red cedar. Swing, sliding and telescopic, designed to match your home. Nothing is made until you approve the blueprint.

The right type depends on your driveway: its length, slope and how close it is to the street. Press play to see each one open. We check all of this at your design consultation.
Every gate we build is custom made. These are only a few ideas, and the options are almost endless.
Single or double gates, opened by arm motors mounted on the gate. Needs clear, fairly flat space behind the gate to open.
The gate is hung so it lifts as it opens, following the slope up. It clears the driveway instead of hitting it.
Slides open behind a block wall, driven by a slide motor standing right next to the gate. Needs wall space about as wide as the opening.
Not enough wall for a full slide? Two panels stack behind the wall as they open, so they need about half the space.
Match your driveway gate and fence, with keypad and smart lock options.
Cheap wood can deteriorate quickly. We use premium Iroko and Western red cedar, selected for their durability, beautiful finish and ability to withstand the elements. Want the look of wood with less upkeep? Ask about aluminum with a wood-grain finish.
Book Design Consult
5.0★★★★★550+ reviews
“We hired DNA for a newly constructed 10,000 sq-ft house. We had very high expectations of the gates’ quality to match the quality of the house designed by a well-known architect in Los Angeles. Every component was built and selected carefully with high quality.”
“From start to finish, the team was professional, efficient, and knowledgeable. The quality of the gate and the attention to detail during installation were outstanding. The team kept everything tidy and was respectful of my property throughout the entire process. I now have a gate that not only adds security but also enhances the curb appeal of my home.”
“We installed 3 gates from DNA Gates. They were fast and really did a good job installing the gates. Very professional”
It depends on three things: how much flat space you have behind the gate, how much wall or fence you have beside it, and the slope. Plenty of flat space behind: a swing gate. Wall space beside the opening: a sliding gate. Not much wall space: a telescopic sliding gate. We measure all of this at your design consultation and recommend the best fit.
Premium Iroko and Western red cedar. Both are selected for their durability, beautiful finish and ability to withstand the Los Angeles sun and weather.
Premium Iroko and Western red cedar resist rot, warping and cracking far better than cheap wood. Like any natural wood, it looks best with a fresh oil or seal from time to time. We explain the care at your consultation.
Yes. We install LiftMaster motors, remotes, keypads and video intercoms with your new wood gate, so it opens easily from your car or phone.
A regular sliding gate needs wall or fence space about as wide as the opening, so it can slide fully behind it. If you only have about half that space, a telescopic gate uses two panels that stack as they open, so it fits.
Yes. If the driveway rises behind the gate, we build an uphill swing gate that lifts as it opens so it clears the slope. A sliding gate is also a good choice on a slope.
Swing gates use arm motors that connect the pillar to the gate, such as the LiftMaster LA500. Sliding and telescopic gates use a standing slide motor behind the wall, such as the LiftMaster RSL12UL. We add remotes, keypads and video intercoms the same way.
Real wood gives the warmest, most natural look. Aluminum with a wood-grain powder coat looks like wood, does not rust or rot, and needs less upkeep. We show you both at the design consult.





The live form appears in Preview and on the website.
By submitting, you agree DNA Gates & Fences may call and text you about your request. Msg & data rates may apply. Reply STOP to opt out. Privacy Policy