Custom iron driveway and pedestrian gates, from ornate estate designs to clean modern lines. Swing, sliding, bi-folding and telescopic, made to fit your entrance and your driveway’s slope. Nothing is made until you approve the blueprint.

The right type depends on your driveway: its length, slope and how close it is to the street. Press play to see each one open. We check all of this at your design consultation.
Every gate we build is custom made. These are only a few ideas, and the options are almost endless.
Single or double gates, opened by arm motors mounted on the gate. Needs clear, fairly flat space behind the gate to open.
The gate is hung so it lifts as it opens, following the slope up. It clears the driveway instead of hitting it.
Slides open behind a block wall, driven by a slide motor standing right next to the gate. Needs wall space about as wide as the opening.
Not enough wall for a full slide? Two panels stack behind the wall as they open, so they need about half the space.
Each side folds in half as it opens, so it needs about half the swing space. A strong fit close to the street.
Match your driveway gate and fence, with keypad and smart lock options.
Every iron gate is hot-dip galvanized to stop rust from the inside out. Handmade estate gates get several layers of spray finish, and modern steel gates are powder coated in your color. Solid frames, clean welds and strong hinges keep your gate straight and quiet for years.
Book Design Consult
5.0★★★★★550+ reviews
“We hired DNA for a newly constructed 10,000 sq-ft house. We had very high expectations of the gates’ quality to match the quality of the house designed by a well-known architect in Los Angeles. Every component was built and selected carefully with high quality.”
“From start to finish, the team was professional, efficient, and knowledgeable. The quality of the gate and the attention to detail during installation were outstanding. The team kept everything tidy and was respectful of my property throughout the entire process. I now have a gate that not only adds security but also enhances the curb appeal of my home.”
“We installed 3 gates from DNA Gates. They were fast and really did a good job installing the gates. Very professional”
It depends on three things: how much flat space you have behind the gate, how much wall or fence you have beside it, and the slope. Plenty of flat space behind: a swing gate. Wall space beside the opening: a sliding gate. Short driveway close to the street: a bi-folding or telescopic gate. We measure all of this at your design consultation and recommend the best fit.
Each side needs clear space behind it about as wide as the gate itself, so it can swing all the way open. If cars park there or the driveway is short, a sliding or bi-folding gate usually works better.
A regular sliding gate needs wall or fence space about as wide as the opening, so it can slide fully behind it. If you only have about half that space, a telescopic gate uses two panels that stack as they open, so it fits.
Yes. If the driveway rises behind the gate, we build an uphill swing gate that lifts as it opens so it clears the slope. A sliding gate is also a good choice on a slope.
Swing gates use arm motors that connect the pillar to the gate, such as the LiftMaster LA500. Sliding and telescopic gates use a standing slide motor behind the wall, such as the LiftMaster RSL12UL. We add remotes, keypads and video intercoms the same way.
Not when it is built right. We hot-dip galvanize every iron gate, which coats the steel in zinc to stop rust. Handmade gates then get several layers of spray finish, and modern steel gates are powder coated.
Iron is heavier and stronger, and it is the best choice for ornate, classic and estate designs like the ones on this page. Aluminum is lighter and suits modern slat and privacy designs.





The live form appears in Preview and on the website.
By submitting, you agree DNA Gates & Fences may call and text you about your request. Msg & data rates may apply. Reply STOP to opt out. Privacy Policy